| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 57900/Set
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Gas Fired Steam Boiler
|
Steam capacity |
2000 Kg/Hr |
|
Rated working pressure |
1.0 Mpa |
|
Hydraulic testing pressure |
1.4 Mpa |
|
Saturated Steam Temperature |
184 ºC |
|
Thermal Efficiency |
90% |
|
Power supply |
380V,3P,50Hz |
|
Max fuel consumption/Natural gasl |
160 Nm3/h |
|
Main steam valve |
80 DN |
|
Safety valve |
40 DN |
| Water inlet diameter | 40 DN |
| Blow down valve caliber | 50 DN |
| Chimney diameter | 400 DN |
| Overall size(L*W*H) |
5220*2980*3320 mm |
| Transportation size(L*W*H) |
4020*2040*2430 mm |
|
Weight |
6800 kg |
WNS series gas/oil fired steam boiler is three-pass full wet back structure, adopting large furnace and thick smoke pipe to increase the heat absorption of the furnace and effectively save energy and reduce consumption. The threaded pipe and corrugated furnace greatly enhance the heat transfer effect and greatly save fuel consumption. The main structure includes: boiler shell, ripple furnace, reversal chamber, thread smoke tube, etc. The burner brand can be chosen according to user' s requirement.
WNS series gas/oil fired steam boiler is designed and optimized to produce low pressure steam or hot water with rated evaporation capacity from 1 to 20 ton/hour and rated pressure from 0.7 to 1.6MPa. The design heat efficiency is up to 95%.
Feature:
1. High temperature in a low pressure
2. Stable heat system
3. Easily temperature control.
4. High heat efficient
5. Excellent operation control system
6. Safe monitor device
7. Less water, electricity, production cost
Technical Information:
Considering the convenience of the maintenance of the user, we will provide the following technical
information:
a. Boiler general drawing for Special Equipment and blue drawing for main body.
b. Boiler safety & quality supervision inspection certificate.
c. Product quality certificate.
d. Pressure parts strength calculation sheets.
e. Safety valve discharge calculation sheet.
f. Confirmation list for debugging.
g. Boiler operation, installation and maintenance manual.
Product Details:
|
1. Boiler product type: WNS
2. Rated evaporation:2000Kg/H
3. Rated working pressure:1.0Mpa
4. Saturated steam temperature:184°C |
|
|
|
|
||
Boiler Introduction:
WNS Oil Fired Steam Boiler:
Boiler production is strictly in accordance with the production process
Relevant inspections that must be done before the boiler leaves the factory - to ensure the safety and reliability of the boiler
Packing and Delivery:
Boiler / accessory packaging and delivery process
TOTAL SOLUTION ,TOTAL CARE
D&R Machinery are professional confectionery machine manufacturers with over 20 years in the business operating at the highest industry standards.
We've built a reputation on engineering, designing and delivering high performance total-solution confectionery machinery to clients with absolute precision around the world.
The confectionery machinery industry is a small world, and we've slowly become leaders in innovation and creative solutions for clients from all walks of the industry. D&R Machinery has become synonymous with one word and one world only in the confectionery machinery world and that is 'total-solution', that is end to to end turn key production of the highest quality confectionery machinery in the world.
Becoming the D&R Machinery you see today starts and ends with the word 'care'. You don't become the best without a plan that ensures our clients achieve the success they desire, and at D&R Machinery it starts with care and ends with trust, reliability and innovation.
D&R Advantages
* Technical advantages, industry-leading technical team, founding team of Chinese starch mogul and young generation of highly educated bilingual engineers.
* Modern service concept, provide customers with laboratory services for formula R&D, product & market analysis and planning, and control the risk before the product is put on the market.
* Rich industry experience, fully communicate with customers in the pre-sales service at the initial stage of the scheme, and customize the best scheme suitable for customers in combination with rich experience in international plant construction.
* For fine manufacturing, international famous brand spare parts are selected, and high-quality suppliers are selected by using the global spare parts. The purchased machined parts shall be subject to two inspections: delivery and warehousing, and shall be marked and warehoused after passing the inspection.
* The whole process of nanny service, we always keeps close communication with customers in the whole project service before, during and after sales, and provides professional suggestions for relevant supporting facilities from the overall perspective of the project.
Our Service
1.D&R Machinery With Many Years Experience
2.High Technology team
3.Giving The Whole Project Solution
4. Consulting For Candies, Gummy, Chocolate And Its Packing
5.Always Giving The Economic Machine
6.Better Quality, Better Service After Sales For All Of The Customer
1.Q:Where are your company?
A:The company is located at F12, Shanshan Plaza, Yinzhou District, Ningbo, China.
2.Q:Are you direct factory?
A:We are both manufacturer and technical trading company. We are professional confectionery machine manufacturers with over 20 years in the business operating at the highest industry standards. We've built a reputation on engineering, designing and delivering high-performance total-solution confectionery machinery to clients with absolute precision around the world. Certainly,we welcome you to come visit our factory.
3.Q:What are your main products?
A:All kinds of Chocolate making machines, Candy making machines,Swiss roll and layer cake production line, Cadny bar production line and Packing machines.
4.Q:Do you have gurantee for your product?
A:We have a full quality control system.Every hardware part must be checked by the quality inspector before the products enter to the warehouse.Our electric elements are all famous brands, most of them are imported. When each machine is finished, we will invite customers to test and run the machine in our factory to ensure the high quality of our machines. Besides, we have CE, and SGS certification.
5.Q:How can we contact you?
A:Here is contact information:
Contact company: Ningbo D & R Machinery Co., Ltd
){kind=link}